How To You Can Play Sony PlayStation 2 Games on your PC

It was the turn of the century. A year when Harry Potter had made its debut in the film, the Nokia 3310 was the #1 selling cell phone in world. Then “Oops!” Britney, did it again. The year 2000 was a time of several highs, following the Y2K excitement, among them included Sony’s PlayStation 2.

Sony’s third attempt at winning the home console battle made a splash with its highest rating among its peers; Sega’s Dreamcast, Microsoft’s Xbox as well as Nintendo’s GameCube. The design featured the DVD player, backwards compatibility, and an impressive collection of exclusive games, in 2011, the console would go through the process of selling more than 150 million units all over the world. It’s also currently holding it as the most-sold gaming console of all time.

Dear reader, I’m here to brighten your day by bringing you some vitally needed good news. I’m here to inform you that thanks to the magic of emulators , you have the chance to play all of your most loved games from past consoles. This, ofcourse, includes Sony PlayStation 2! Sony PlayStation 2.

Let’s Talk Emulators

The primary goal of an emulator is to emulate, gaming consoles thus giving PC (and later, Android) users to play games from their preferred consoles from the past. It means that users who aren’t diehard collectors won’t need a console at all in order to experience the huge catalog of games that PlayStation 2 originally offered.follow the link https://www.gearrice.com/update/how-to-play-ps2-games-on-android/ At our site

Through built-in software emulators can read and project the disc image for a particular game onto your computer . It can then use it as a storage device and display. The amount of information stored on your computer from this emulator, as well as from ROMs (more on these later) is only limited by the storage capacity on your hard drive. There are also replica controllers that you can buy to work with your computer so that it feels even more like the real thing!

Making A Choice About An Emulator

It’s not difficult to locate an emulator. There are a lot available on the internet for download. However, a large portion of them tend to be extremely poor in both design and appearance. You’ll have to be able how to tell the difference between the one that’s worth downloading from that can be ignored.

Luckily for you, you’re likely to join in on the fun just a little late. All of the heavy lifting is done by gamers who have already tried them out for a test run. Popularity of a handful will speak for themselves when it comes down to quality and trust. PCSX2, Damon PS2, and Gold PS2 are among the most well-known options for your PC and Android device. For reliability and stability as well as graphic settings you’ll be hard-pressed to find a better choice.

Start, download and Install An Emulator

As one of the oldest and more reliable PS2 emulators I’ll walk you through the procedure using my personal emulator that is PCSX2. PCSX2 is a no-cost PlayStation 2 emulator that allows you to adjust resolutions to 4096×4096. Additionally, it allows you to apply texture filtering and anti-aliasing, to make older PS2 games appear better than current HD remakes. It also comes with an built-in HD video recorder to help you create new memories that can be captured using video.

To make sure that the PCSX2 runs smoothly on your computer, here are the recommended and minimum system specifications:

MINIMUM

  • Windows (or Linux OS
  • The CPU should support SSE2 (Pentium 4+, Athlon64+)
  • The GPU must support Pixel Shader Model 2.0, not Nvidia FX series
  • Minimum at 512MB RAM (Vista users will require 2GB)

RECOMMENDED

  • Windows Vista/7 (32bit or 64bit) with the most up-to-date DirectX
  • CPU Intel Core 2 Duo @ 3.2 milliseconds or better OR i3/5/7 @ 2.8 GHz or more OR AMD Phenom II @ 3.2 1.25 GHz or higher
  • GT: 8800GT or higher
  • RAM: 1GB with Windows/Linux two GB plus on Vista/7.

Run the emulator using the minimum system requirements is likely to cause an extreme delay in game for greater GPU and CPU intensive games.

To begin:

  1. Download the latest version of PCSX2 created for your operating system. Always look for the latest “stable” version available for download since it’s less likely to cause issues.
  2. If you’re using the Physical PlayStation 2 console, you’ll require an BIOS version from that console. A PS2 BIOS is different from your PC’s BIOS when you boot. PCSX2 is not a BIOS file , as it’s an issue with Sony copyright. It is in violation of the law. To download any BIOS data from your PlayStation 2, head here and download the version of BIOS Dumper that you prefer. There’s also a link to a forum thread which will assist you on how to eliminate your BIOS.

    • The PCSX2 emulator and any other PS2 emulator, is not able to run without a PS2 BIOS. In the event of a need, it’s possible to consider piracy as there are sites that offer a PS2 BIOS download. AppNee provided a complete list of BIOS compatible with all PS2 emulators currently available. They also cover all regions and models of PlayStation 2 as well. It’s probably the most user-friendly and least intrusive solution.
  3. Install PCSX2 with the .exe file that you downloaded through the downloading.
  4. The first screen to pop up will be that “Choose Components” screen. Click Next.
  5. This is followed by next step: the Visual C++ box. Click the “I agree to the terms and condition” box and click Install. PCSX2 now has been installed.
  6. Find the PCSX2 folder in the start menu (or desktop if you have put it on there) and double-click the executable.
  7. The first time configuration page will open , and it will greet you with a welcome message. There is an option drop-down menu to make a language selection , as well as links to the guide for configuration online and Readme PDF. You can skip all of this and instead proceed to the next.
  8. This page should bring up a host of drop-down menus. Each represents the PCSX2 software. I suggest using the default settings, then hitting the Next button again.
  9. Here’s where it’s necessary to enter your BIOS information. Find the BIOS file within the directory you indicated after ripping it earlier in step 2. When you’ve located (or copied) click the Refresh list button and select your BIOS rom from the window. When you’re ready to move ahead, click Finish finish the procedure.

The emulator is now installed but before you can use it, you’ll need to first configure the controls. You are able to (and should) use a gaming controller if you own one. This includes the PS3, PS4, PS3, PS4, or even an Xbox 360 controller. I wouldn’t recommend you settle for your keyboard. The frustration never ceases and, to be honest it’s not feeling right.

Launch PCSX2:

  1. Choose for the “Config” tab, and then from the drop-down list, select “Controllers (PAD)” in addition to “Plugin Settings …”.
  2. There are three different tabs “General”, “Pad 1″”Pad 1,” and “Pad 2”. Pad 1 And 2 represent the players. Therefore, you ought to go”Pad 1″ to “Pad 1” to get the controls set up.
  3. The buttons you’ll require to configure are listed on the right. Select a button and after that press the button (on gamespad) or the key (keyboard) that you wish to configure it to. The buttons you have configured will show within the “Device/PC Control/PS2 Control” panel.
  4. After you’ve set up your keybindings, you can decide to set up the next one if you’d like. If not select OK.

Let’s Talk About ROMs

Now that the emulator is taken care of, it’s time to get onto the fun part. For those who still have the previous PS2 game discs to be aware that the emulator will play them like it was an actual PlayStation 2. Just drop the PS2 DVD directly into the drive for your disc, go through the “System” tab in PCSX2 emulator, click on the “System” tab PCSX2 emulator, and then choose “Boot CDVD (full)” before you start playing.

However, if you’re just like me and do not own any of the originals (or you want to play a few games that you currently don’t own) you’ll need to download some games ROMs. They’re also called Read-Only Memory, can be downloaded from a variety of PS2 enthusiast websites such as UberUpload, CoolROM, and ROMHustler. Each of these websites has a plenty of ROMs to choose from which to choose in order to satisfy that nostalgic itch. These files are copies of the first Sony PlayStation 2 games of the past. ROMs are just compressed versions of them and are much more easily distributed than the original discs.

What you do with these ROMs is entirely up to you. They are usually either .iso or .rar kind of file. Windows 10 allows you to load .iso files directly, without the requirement of a third-party software or burned CD/DVD. For the other versions of Windows, you’ll need a third-party application like Daemon as well as MagicISO to play ROMs directly on your computer as well as ImgBurn which burns .iso files onto the CD. If you’re using .rar documents, you could attempt to use it directly in the emulator and see what happens. For failure, however, the user will have be able to unzip the .rar archive using the help of a file opening program (WinZip 7Zip, WinZip) in your emulator, then launch it after which you can open the downloaded file.

Playing RMS

With a downloaded .iso game file, you can get right into playing. What you’ll want to do is:

  1. Within the PCSX2 emulator, click”CDVD” within the “CDVD” screen menu. Choose “Iso Selector” If the .iso has been pre-loaded the game should be available to select. If not you can select”Search… to search for the .iso file of the game.

    • It’s highly recommended to ensure that all the .iso files are saved to one folder to make it easier for access.
  2. After the .iso file is loaded, click on the “System” tab, then select Boot/Reboot CDVD.
  3. Your game will start playing and will be playable.

Are you having issues?

To set up all this could be a hassle and it’s not unusual to have a few issues. Is your game running too slow? It could be because your PC is incompatible so be sure to verify the recommendations of your system against your current PC configuration.

Another cause of concern is that the game you want to play isn’t available on PCSX2. There’s a list with compatible games to look through to see if your game is in it. If you cannot find your game on the list This means it’s not been tested in the past. The best thing to do is go to the PCSX2 forums to let them know. This is also a great forum to ask for help to resolve any other problems with the emulator.

The game’s source file could be uncompatible, as PCSX2 provides support for .iso, .bin, .img, .mdf, and .nrg files. It’s also possible that the game’s file may be damaged or damaged in any way. If you want to find out, you’re better off downloading a fresh file from an alternative website and trying it out.

If you see the “CDVD plugin was unable to open. Your computer might have insufficient resourcesor hardware/drivers that are not compatible” error, this means PCSX2 has been damaged in a forced shut-down. To fix this problem, you’ll be required to force close the computer again and then choose an alternative graphics plugin.

Close the doors:

  1. You can access your Task Manager via right-clicking your taskbar and selecting it from the pop-up window, or pressing CTRL+ALT+DEL together and choosing Task Manager out of the menus in the display.
  2. From there, find the PCSX2 that is running under the “Processes” tab Select it, highlight it, and then click the End Task button. When the pop-up is displayed.
  3. Close Task Manager and then start PCSX2 again.
  4. Open the “Config” tab and click”Configure… to bring up the “Configuration” window.
  5. Select a different graphics plugin in the “Graphics” drop-down list and then click OK.
  6. Do try to run your file once more. It should now open just as usual, without the annoying display of an error.